Set 4 x 4.8cm fins
Fins for freeride and light wind twin tip kiteboards.
Recommended for LOGIC freeride and DRIVE light wind kiteboards.
The set contains 4 x 4.8 cm fins + 4 washers + INOX screws (8).
These Blankforce 4.8 kiteboard fins are good for upwind and are highly recommended for beginners as they can smoothly guide your board to go in a straight line.
You’ll get overall tolerance on mistakes and on your edging. Big fins automatically supply you with great grip. (If you’re using kiteboards that do not have channels you will profit from extra grip!) Excellent for low wind conditions.
About our Blankforce fins:
Blankforce kiteboard fins are primarily made from a material called G 10 - it's a very dense grade of fibreglass. The advantage of using G10 is that it’s it won’t break - it’s hard wearing and can deal with all kinds of impacts. Salt water does not erode G10 in the slightest!
Why you need kiteboard fins?
Fins are necessary - they are a balanced, streamlined knife shape that give you a perfect fusion of grip and drag - Blankforce kiteboard fins are designed to optimise the abundance of available grip so that you experience the least drag. Blankforce fins are attached to the kiteboard using two stainless M5 steel bolts (5mm thread). The bolt heads countersink into two holes that bare a distance of 38mm. We always provide washer plates with Blankforce fins. The plates balance out the load from the fin and onto the top of the kiteboard.
You might also like